News


When it has to be right, it has to be Robuschi!

Posted July 24, 2020 For more updates why not follow us on Linkedin?


EDC Air Compressors recently attended an emergency breakdown where a bare shaft blower had failed. The repair would have been costly and time-consuming, but our compressor engineers were able to retro-fit a 145kW Robuschi bare shaft blower from stock, keeping downtime - and disappointment - to a mimimum! EDC Air... [Details]


Something to blow about - Robuschi!

Posted June 26, 2020 For more updates why not follow us on Linkedin?


Robuschi reigns supreme! This Robuschi tri-lobe RPD air blower package—complete with a 30kW IP55 ABB Wimes spec motor—will be taken to a water site for commissioning and installation by EDC Air Compressors this month. Compact, robust, simple to operate and integrate, the Robuschi unit is also quiet and easy to... [Details]


EDC Air Compressors springs into action

Posted June 18, 2020 For more updates why not follow us on Linkedin?


EDC Air Compressors sprang into action when a local company needed a new 7.5kW air compressor and refrigerant dryer. The SCR10PM2 permanent magnet screw air compressor (mounted on a 300 litre air receiver) proved to be the perfect fit: economical to buy and run, whilst being one of the most... [Details]


Are you paying too much for your compressed air?

Posted May 01, 2020 For more updates why not follow us on Linkedin?


Staying with the same provider for your compressed air service contract can mean that you're paying more money year on year. Take the EDC Air Compressors challenge and see if we can save you money on your current requirements. We're currently offering to beat your annual service contract by 15%... [Details]


The taming of the screw?

Posted April 28, 2020 For more updates why not follow us on Linkedin?


With compressors it’s rare to be able to step down a size and move up a gear, but that’s exactly what SCR Permanen tMagnet machines enable you to do. Designed with oversized airends they can often match the output of larger, power-hungry, fixed-speed machines and the variable speed control they... [Details]


Standing by our customers

Posted March 20, 2020 For more updates why not follow us on Linkedin?


We'll stand by you: EDC Air Compressors will remain fully operational throughout these difficult times. If you require service engineers to attend to your compressed air system contact us on: 0141 812 3222. We have spares and ancillary equipment to hand. [Details]


Beautiful Baratti!

Posted March 11, 2020 For more updates why not follow us on Linkedin?


Baratti’s just beautiful! This D25KR bare shaft #blower was in need of some care and attention after years of service. EDC Air Compressors provided a full overhaul, metal spraying and machining the bearing diameters on the drive rotor to size, skimming the plates, sleeving the front bearing bores and adding... [Details]


the engineer with the golden gun

Posted January 28, 2020 For more updates why not follow us on Linkedin?


The gun may not be golden, but it seeks out and helps you destroy airleaks in your compressed airsystem. And you might well be shaken and stirred by the amount this leaking air is costing you: 30% of your air capacity (on a poorly maintained system) could be lost to... [Details]


Rugged reliability in the field? It has to be Robuschi.

Posted November 25, 2019 For more updates why not follow us on Linkedin?


When it has to be right…it has to be Robuschi. This rotary lobe positive displacement blower was fitted by our air compressor engineers in Perthshire as part of a Robuschi tri-lobe RPD air blower package. Designed to convey gas at low pressure, its sturdy design, high durability and ease of... [Details]


SCR compressors reduced in price for 2020!

Posted November 20, 2019 For more updates why not follow us on Linkedin?


Newsflash! Let Gary at EDC Compressors make you an offer you can’t refuse. SCR compressors are reducing prices by around 10-15% across most of the range in 2020.  Due to the well-known and respected Japanese company Anest Iwata becoming the majority shareholder in SCR, (and providing increased capital investment) and... [Details]